Maintenance Model 6DS-SP Planarizer
11 - 18 Version 4.0 - February 1998
7. Power up and home the machine.
8. Test the motion by repeating Section B., above.
If the goal is not met, rotate each knob two turns clockwise.
Notes:
• The top knob controls up motion.
• The bottom knob controls down motion.
9. Retest by repeating Section B., above.
Correct by rotating the adjustment knobs in 2-turn clockwise increments
and retesting as needed until the goal is met.
D. WHEN SATISFACTORY ADJUSTMENT IS ACHIEVED
1. Close all doors.
2. Power up and home the machine.
To Next Page
Loading...
