BW437-RTU Quick Guide
Disclaimer
www.stratoautomation.com
Please read this manual before proceeding to install this controller or any other Strato Automation device.
This manual applies to using
firmware version 1.062
and higher.
Installations shall be made by a properly certified technician and respect all local mandatory codes and regulations.
Electronic controls are static sensitive devices: discharge yourself properly before manipulating and installing a controller.
Any short circuit or incorrect wiring may permanently damage the controller or the controlled equipment.
Double check all wiring before applying power.
If a control failure could lead to personal injury and/or loss of property, it becomes the responsibility of the installer to
add safety devices and/or alarm system to protect against failures.
To Next Page
Loading...
