15
Label Color Condition Indicated
ADS-B signal
Green
ADS-B FIS-B signal has been received from
multiple towers in the past three seconds
Yellow
ADS-B FIS-B signal has been received from one
tower in the past three seconds
Off
ADS-B FIS-B signal has not been received in the
past three seconds
All indicators
Briey red and then
green
Receiver is powering on and calibrating
Red (ashing) Built-in-Test failure. Contact support for assistance
Yellow (ashing)
Installing rmware update
Yellow (solid) Applying rmware update
Green for two
seconds
Firmware update complete
Off for ve seconds,
then ashing green
Power button is depressed. After 30 seconds,
factory reset process will begin.
Green to yellow to
green
Factory reset process is complete
To Next Page
Loading...
