StreamLight Scorpion - User Manual

OPERATING INSTRUCTIONS FOR STREAMLIGHTSCORPION
®
,
SCORPION
®
LED, SCORPION
®
X, SCORPION
®
HL™
Congratulations on th
e purchase of the Scorpion series
flashlight, a compact and convenient little flashlight that is a
powerhouse of performance. Proper care and use of this
product will provide years of dependable service.
BATTERY INSTALLATION/REMOVAL
• Unscrew the rubber armored grip flashlight barrel and
remove depleted batteries.
• Insert batteries into barrel negative end first with positive
ends pointing toward the flashlight head.
• Screw barrel onto flashlight head and tighten
W
ARNING: FIRE, EXPLOSION, BURN HAZARD - USE
ONLY RECOMMENDED LITHIUM BATTERIES
Inferior quality lithium batteries can cause fire, explosion, burns.
We recommend the use of ONLY Streamlight or Panasonic,
Sanyo, Energizer or Duracell batteries in our products. Use of
other batteries or mixing brands and old and new batteries may
risk leakage, fire, explosion and serious personal injury. To
further avoid this risk for any brand lithium battery, do not
recharge, misuse, short circuit, disassemble, improperly store
or discard, expose to high temperatures.
GENERAL OPERATION
The Scorpion series flashlights feature a tail cap switch that
allows convenient use without awkward two-handed twisting or
turning.
CAUTION: LED RADIATION; (RG-2)
DO NOT STARE INTO BEAM,
MAY BE HARMFUL TO EYES.
Scorpion, Scorpion LED
• Press the tail switch for momentary activation or push and
click the switch to lock on.
The Scorpion (xenon) has an adjustable focus. Rotate the head
to adjust the focus from a long range, pinpoint beam to a wider,
softer flood effect for close-up use. The Scorpion LED and
Scorpion X models use LEDs "fixed" at optimum focus and are
not adjustable.
Scorpion X (Multi-function LED)
• High: From off, press and hold for momentary activation;
click the switch to lock on.
• Strobe: From off, fast double press and hold for momentary
activation; click the switch to lock on.
• Low: From off, fast triple press and hold for momentary
activation; click the switch to lock on.
Scorpion HL (Programmable Multi-function LED)
The Scorpion HL features a programmable switch with momentary
operation (light press or tap) and constant on operation (press
SCORPION
®
/SCORPION
®
LED/
SCORPION
®
X/SCORPION
®
HL™
Operating
Instructions
FOR SCORPION/ SCORPION LED/ SCORPION X/ SCORPION HL:
CAUTION: LED RADIATION;
(RG-2) -
DO NOT ST
ARE INTO BEAM,
MAY BE HARMFUL TO EYES.

Summary

Battery Installation and Removal

Product Safety Warnings

Lithium Battery Hazards

Critical warning about fire, explosion, and burn hazards associated with using recommended lithium batteries.

LED Radiation Caution

Warning that LED radiation (RG-2) can be harmful to eyes if stared into directly.

General Flashlight Operation

Scorpion and Scorpion LED Operation

Instructions for momentary activation or locking on the tail switch for Scorpion and Scorpion LED models.

Scorpion X Multi-function Modes

Details on accessing High, Strobe, and Low modes for the Scorpion X flashlight.

Scorpion HL Programmable Modes

Explanation of momentary and constant-on operation for the Scorpion HL flashlight.

Scorpion HL Operation Details

Scorpion HL Mode Activation

Instructions for High, Strobe, and Low mode activation through tap and hold or quick taps.

Scorpion HL Programmable Programs

Guide to selecting one of three programs (High-Strobe-Low, High Only, Low-High) for the Scorpion HL.

Operating Heat and Safety

Scorpion HL Heat Generation

Information regarding normal warmth generation during prolonged Scorpion HL operation.

Photosensitive Epilepsy Warning

Caution that strobe mode may trigger seizures in individuals with photosensitive epilepsy.

Bulb Replacement

LED Model Bulb Replacement

Note that LED models do not require bulb replacement.

Scorpion Xenon Bulb Replacement

Detailed instructions for replacing the xenon bi-pin bulb in Scorpion models.

Xenon Bulb Heat Warning

Warning about the high heat of the xenon bulb and precautions to prevent accidental activation.

Maintenance

Flashlight Lubrication

Guidance on lubricating the O-ring area on the flashlight barrel for maintenance.

Genuine Replacement Parts

Recommendation to use only genuine Streamlight replacement parts for the flashlight.

Overview

1. Function Description
2. Usage Features
3. Safety Considerations
4. Battery Installation/Removal
5. Battery Safety Warning
6. Maintenance Features
7. Bulb Replacement (Scorpion xenon only)

The Streamlight Scorpion series flashlight is a compact and convenient illumination tool designed for dependable service and powerful performance. This series includes the Scorpion, Scorpion LED, Scorpion X, and Scorpion HL models, each offering distinct features tailored to various user needs.

Function Description

The primary function of the Scorpion series flashlights is to provide portable illumination. Depending on the model, this illumination can range from a focused beam to a wider flood, with some models offering multiple light output modes such as high, low, and strobe. The Scorpion (xenon) model utilizes a xenon bi-pin bulb, while the Scorpion LED, Scorpion X, and Scorpion HL models employ LEDs, which are fixed at optimum focus for consistent light output. The Scorpion HL, in particular, stands out with its programmable multi-function LED, allowing users to customize their lighting experience through different programs.

Usage Features

All Scorpion series flashlights feature a tail cap switch for convenient operation, eliminating the need for awkward two-handed twisting or turning. This design allows for momentary activation with a press or tap, and constant-on operation by clicking the switch to lock it in place.

For the Scorpion (xenon) and Scorpion LED models:

• Activation: Press the tail switch for momentary activation or push and click to lock on.
• Focus (Scorpion xenon only): The Scorpion (xenon) model offers an adjustable focus. Users can rotate the head to transition the beam from a long-range, pinpoint focus to a wider, softer flood effect suitable for close-up tasks. The Scorpion LED and Scorpion X models, however, use fixed-focus LEDs and are not adjustable.

For the Scorpion X (Multi-function LED) model, multiple output modes are available:

• High: From the off position, press and hold the switch for momentary activation, or click to lock on.
• Strobe: From the off position, quickly double-press and hold the switch for momentary activation, or click to lock on.
• Low: From the off position, quickly triple-press and hold the switch for momentary activation, or click to lock on.

The Scorpion HL (Programmable Multi-function LED) model offers advanced programmability and multiple modes, shipped from the factory with a default High-Strobe-Low program.

• Activation: Light press or tap for momentary operation, or press until a click for constant-on operation.
• High Mode: Tap and hold, then click to lock on; click again for off.
• Strobe Mode: Fast double-tap (within 0.4 seconds) and hold, then click to lock on; click again for off.
• Low Mode: Fast triple-tap (within 0.4 seconds per tap) and hold, then click to lock on; click again for off.
• Programmability (TEN-TAP™): The Scorpion HL features a TEN-TAP™ programmable switch that allows users to select one of three different programs: High-Strobe-Low (Factory Default), High Only, or Low-High. To change the program, from the "Off" position, rapidly tap the switch 9 times (within 0.4 seconds per tap) and hold it down the 10th time. Continue holding the switch until the light turns off (approximately 1 second), then release the switch.

Safety Considerations:

• LED Radiation: For Scorpion, Scorpion LED, Scorpion X, and Scorpion HL models, a caution regarding LED radiation (RG-2) is issued: "DO NOT STARE INTO BEAM, MAY BE HARMFUL TO EYES."
• Heat Generation: The Scorpion HL, when operated for extended periods, may become uncomfortably warm. This is considered normal for powerful LED flashlights of similar size and performance and does not present a burn hazard, especially for tactical short-period use.
• Strobe Mode: A warning is issued regarding the use of light in "strobe" mode, as it may cause seizures in persons with photosensitive epilepsy.
• Xenon Bulb Heat: The Scorpion (xenon) utilizes a high-wattage xenon bulb that can get very hot. Users are warned not to place the Scorpion face-down against flat or flammable surfaces and to transport or store it in a way that minimizes accidental activation.

Battery Installation/Removal

The process for installing and removing batteries is straightforward:

1. Unscrew the rubber-armored grip flashlight barrel.
2. Remove any depleted batteries.
3. Insert new batteries into the barrel, negative end first, with the positive ends pointing toward the flashlight head.
4. Screw the barrel back onto the flashlight head and tighten it securely.

Battery Safety Warning:

• Recommended Batteries: Users are strongly advised to use ONLY Streamlight, Panasonic, Sanyo, Energizer, or Duracell lithium batteries in these products.
• Risks: Using inferior quality lithium batteries, mixing brands, or combining old and new batteries can lead to leakage, fire, explosion, burns, and serious personal injury.
• Further Precautions: To mitigate risks, users should never recharge, misuse, short-circuit, disassemble, improperly store or discard, or expose any brand of lithium battery to high temperatures.

Maintenance Features

Proper care and maintenance ensure the longevity and dependable service of the Scorpion series flashlights:

• O-ring Lubrication: The O-ring area on the barrel should be kept lubricated to maintain its sealing integrity.
• Rubber Armored Grip: The rubber-armored grip on the flashlight barrel requires minimal maintenance.
• Replacement Parts: It is important to use genuine Streamlight replacement parts for any necessary repairs or replacements.

Bulb Replacement (Scorpion xenon only):

• LED Models: LED models (Scorpion LED, Scorpion X, Scorpion HL) do not require bulb replacement as LEDs have a significantly longer lifespan. Users should not attempt to change the LED in these models.
• Xenon Bulb Life: The xenon bi-pin bulb in the Scorpion (xenon) model is designed to last through three to five sets of batteries under continuous use. Intermittent use may result in shorter bulb life due to repeated start-up shock and higher voltage spikes.
• Replacement Process:
  1. Unscrew the flashlight head from the barrel.
  2. Remove the bulb holder assembly.
  3. Always wear safety glasses and gloves. Allow a hot bulb to cool before handling.
  4. Pry off the cup-shaped silver-colored contact on the bottom of the bulb holder assembly.
  5. Remove the spare bulb (located inside the bulb holder assembly) and replace the contact.
  6. Firmly grasp the burned-out bulb and pull it from the holder assembly.
  7. Grasp the replacement bulb and direct its pins straight into the holes in the holder assembly until the bulb is firmly seated.

StreamLight Scorpion Specifications

General

Brand	StreamLight
Category	Flashlight
Beam Distance	200 meters
Battery Type	CR123A Lithium
Water Resistance	IPX4
Bulb Type	LED
Material	Aircraft-grade aluminum
Light Output	200 lumens
Switch Type	Tail Switch
Battery	CR123A Lithium