EasyManua.ls Logo

Streetwize SWPP1 - User Manual

Default Icon
4 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
SWPP1 - Instructions For Use
12V Portable Power Station,
Emergency Jumpstart
with Air Compressor
WELCOME: This product has been carefully engineered and manufactured to give you dependable operation.
Please read this manual thoroughly before operating your new product as it contains the information you need
to become familiar with its features and obtain the performance that will bring you continued enjoyment for
many years. Please keep this manual on file for future reference.
CONTROLS:
ON/OFF Safety switch:
Cuts power to Booster Cables,
until you are ready to jumpstart.
Prevents accidental shocks during
LED Light ON/OFF
Jumpstart Charging Port
1Amp USB Charging Socket
Reverse Polarity Warning
LED Charging Indicator
Analogue Pressure Gauge
Built-in 7 LED Light
Air Hose Storage Compartment
Battery Check Button
Air Compressor ON/OFF switch
2 x 12V Outlet Sockets (11A Rating)
Heavy Duty Impact Resistant
Rubberised Housing

Other manuals for Streetwize SWPP1

Question and Answer IconNeed help?

Do you have a question about the Streetwize SWPP1 and is the answer not in the manual?

Summary

Controls Overview

Jumpstart Charging Port

Port for connecting the charging or jumpstart cables.

LED Light ON;OFF

Switch to control the built-in LED work light.

1 Amp USB Charging Socket

Socket for charging USB devices.

ON;OFF Safety Switch

Cuts power to booster cables to prevent accidental shocks.

Safety Cautions and Warnings

Jumpstarting an Engine

Jumpstart Preparation

Steps before connecting and starting the engine.

Clamp Connection and Operation

Procedure for connecting clamps and operating the system.

Jumpstart Warnings

Critical safety notes and error indicators during jumpstarting.

Using the Air Compressor

Explosion Hazard Warning

Critical safety warning regarding battery exposure to heat or fire.

Summary

Controls Overview

Jumpstart Charging Port

Port for connecting the charging or jumpstart cables.

LED Light ON;OFF

Switch to control the built-in LED work light.

1 Amp USB Charging Socket

Socket for charging USB devices.

ON;OFF Safety Switch

Cuts power to booster cables to prevent accidental shocks.

Safety Cautions and Warnings

Jumpstarting an Engine

Jumpstart Preparation

Steps before connecting and starting the engine.

Clamp Connection and Operation

Procedure for connecting clamps and operating the system.

Jumpstart Warnings

Critical safety notes and error indicators during jumpstarting.

Using the Air Compressor

Explosion Hazard Warning

Critical safety warning regarding battery exposure to heat or fire.

Streetwize SWPP1 Specifications

General IconGeneral
BrandStreetwize
ModelSWPP1
TypeRemote Starter
Battery Capacity8000mAh
Voltage12V
Peak Current400A
Starting Current200A
USB Ports1
LED LightYes

Related product manuals