Format
Memory
Card
Decision with caution! You will
lose all of the data in the memory
card if you decide to format it
Yes
No (default)
Serial NO
To set up the serial number of the
camera1 2 (3)
On
O (default)
Reset
Settings
Reset all the settings to the
original settings
Yes
No (default)
Version Version of the system 9135
(1) For example, we set the 1 minute video length and 30 seconds shot lag. When the
camera detect an animal, it will start to record a 1-minute video. However, the camera
will not detect continuously. When the video is done, the camera will not detect
immediately. It will detect again 30 seconds after the video in order to save the battery.
(2) In order to use the “Target Recording Time” function, please make sure that you have
already turn of the “Time Lapse” function and set up the length of the lapse between
each photo.
(3) If you use several cameras at the same time and you want to recognize which camera
took which photos and videos, set up a serial number could help you. The serial number
will show on the bottom right of the photos or videos.
11
To Next Page
Loading...
Need help?
General
