EasyManuals Logo

strex SP48 User Manual

strex SP48
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
4. QA
1. I can’t turn on my camera!
√ Please check if the batteries is full power;
√ Please check if battery polarity is correct;
√ Please re-install the batteries.
2. My camera is not taking photos or recording videos!
√ Check if the TF card is Class 10;
√ Check if the TF card works normally on other devices;
√ Format the TF card.
3. The camera doesn’t detect anything!
√ Please make sure that the camera is not behind the glass;
√ Please check the setting in the menu to adjust the detection
distance and the detection sensibility of the camera then try again.
4. Why the camera doesn’t record during the night but it works well during day time!
√ Please check the battery level of the camera. If the battery is low (1/3 of the full battery), the
night vision function will automatically shut down. Please change the batteries then the night
vision function will restore.
5. My “Target Recording Time” function doesn’t work!
√ Please check if you have also turned on the “Time Lapse” function and have chosen the time
lapse mode then set up the lapse length.
12

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the strex SP48 and is the answer not in the manual?

strex SP48 Specifications

General IconGeneral
Brandstrex
ModelSP48
CategoryDigital Camera
LanguageEnglish

Related product manuals