Strobel 4 - Page 6

2 MA_560_A4_180619_en
3.6 Plunger ......................................................................................................... 19
3.6.1 Removing and remounting the plunger (Fig. 11 and Fig. 12) ........... 19
3.6.2 Mounting and setting the plunger drive
(Fig. 11, Fig. 13, Fig. 14 and Fig. 15) ............................................... 21
3.6.3 Mounting and setting of the plunger drive
(Fig. 12, Fig. 16, Fig. 17 and Fig. 18) ............................................... 24
3.6.4 Setting the digital stitch depth display (Fig. 14 and Fig. 19) ............. 27
3.7 Plunger plate ................................................................................................ 28
3.7.1 Setting the plunger plate (Fig. 11 and Fig. 17) ................................. 28
3.8 Distance looper point to knife point (Fig. 20) ................................................ 28