Stromag 51 Series - Page 42

Original assembly/operating instructions Gear limit switch Type series 51 • No. 151-00004 H • 01.2018 42
12 Content Rendition of Declaration of Conformity
Content rendition of the
EC Declaration Of Conformity
According to Directive on Machinery 2006/42/EC Annex I, Chapter 1.7.4.2
Note: The complete, product-specific EC Declaration of Confomity ist part of the product and will be delivered with
the product.
Manufacturer: Stromag GmbH
Hansastr. 120
59425 Unna
Germany
Resposible for the documentation: Head of design dept. TB-EKM
Product designation: Geared Cam Limit Switch Series 51
The product complies with all relevant provisions of the above-mentioned directive.
The Low Voltage Directive 2014/35/EU was complied with in terms of its safety objectives.
Applied harmonised standards:
EN ISO 12100
EN ISO 13849-1
EN ISO 13849-2
Other applied standards:
ISO/TR 14121-2
EN 60529
EN 60947-5-1