Need help?Do you have a question about the Stromag HGE Series and is the answer not in the manual?
Information about the scope, purpose, and usage of the documentation.
Defines the intended audience for the manual, including their required qualifications.
Specifies the necessary qualifications for different tasks like transport, assembly, and operation.
Defines intended applications and warns against improper uses that can cause danger.
Identifies inherent dangers that cannot be eliminated despite safety-oriented construction.
Explains hazard levels (DANGER, CAUTION) and types of warning symbols used.
Covers safety aspects related to electrical hazards and responsibilities.
Guidelines for careful transportation to avoid damage, noting packing information and potential issues.
Specifies conditions for proper storage to prevent damage (dry, dust-free, no aggressive media).
Details product dimensions, mechanical specifications, and operating parameters.
Illustrates contact arrangements and identifies connection points for various GTES types.
Identifies key components of the GTES using a numbered diagram and list.
Explains the construction, operation, and features of the gear part and switch parts.
Provides safety warnings for assembly, including live components and rotating parts.
Lists specific tightening torques for various connection points during assembly.
Details how to make electrical connections, including screw connections and earth conductor.
General procedure for adjusting switching points, including cover removal and remounting.
Detailed steps for performing normal adjustment of switching points using cam discs.
Notes that adjustment is only permitted when the machine is at a standstill.
Warns about risks if general safety guidelines are not observed during maintenance.
Provides guidance on cleaning the GTES housing with a dry cloth and avoiding cleaning agents.
States no typical malfunctions are known and advises contacting Customer Care for queries.
General safety warnings applicable to disassembly procedures.
Steps for disassembly, including switching off the machine, removing cover, cable, and GTES.
Lists required data from the type plate for ordering spare parts: order number, type series, designation.
To Next Page
General