EasyManua.ls Logo

Strongback Mobility Strongback 24 Series - General Information; Product Purpose, Limitations & Responsibility

Strongback Mobility Strongback 24 Series
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3 Revision: March 2018
Avoid shifts in weight that could lead to the wheelchair tipping over, for example:
Adding additional cushions or other sitting aids
Changes to posture, sitting position or weight distribution
Attaching a rucksack or bag to the wheelchair
If an object that you would like to get hold of is beyond your reach, ask for help or use
other aids to get hold of it.
There is an increased risk of tipping over when travelling on poor quality paths or roads
(e.g. coarse gravel, potholes, etc.) or moving over drops (e.g. curbs, etc.).
2.3 Transportation in motor vehicles
This wheelchair is not intended to be an alternative to a car seat. When
travelling by car, the wheelchair user should always transfer to a seat
intended for use in such a vehicle. Ensure the wheelchair is securely
folded together for transportation in the car. Always transport the
wheelchair in the trunk or luggage compartment of the vehicle. Never use
a wheelchair that has been involved in a traffic accident.
3 General information
These instructions for use are designed to help you familiarize yourself with the use and
handling of the wheelchair. They are an integral and necessary component of the
wheelchair. Ensure that you always have these instructions on hand and make sure that you
include them with the wheelchair when you transfer it to another owner.
Please read all the instructions carefully before using the wheelchair for the first time.
3.1 Signs and symbols
Caution! It is important to follow all the instructions in the sections marked
with this symbol in order to avoid potential injury to yourself or people in
your vicinity.
3.2 Intended purpose
The STRONGBACK 24 is designed solely for the purposes of transporting a physically disabled
person and improving their mobility. It has been designed for both indoor and outdoor use.
The wheelchair has been designed to accommodate a maximum load of 300 lbs./135 kg.
Liability can only be accepted if the product is used under the prescribed conditions and for
its intended purposes.
3.2.1 Indications for use
Inability to walk or serious difficulty in walking as a result of: