Currency change
The pool configuration parameters will be saved after the first setting. Then you can
change the current as follows:
1. Click “Cryptocurrencies” in the upper right corner and select the currency in the
drop-down menu.
2. Verify the pool parameters displayed.
3. Click “Save&Apply” in the lower right corner. The miner will run with new
currency parameters.
The StrongU miner monitor provide the following data:
6. Summary
Operating time/real-time hash/average hash/number of blocks
identified/number of local tasks/number of completed shares/cumulative
difficulty/maximum difficulty/speed of fan 1/speed of fan 2, etc.
7. Pools
Pool address/miner name/pool status/number of obtained tasks/pool
priority/number of accepted tasks/number of rejected tasks/number of
abandoned tasks/number of overdue tasks/previous difficulty/completion
time of previous task, etc.
8. StuMiner
Hash board number/number of acceptances/number of rejections/operating
frequency/number of errors/status/average hash/temperature, etc.
To Next Page
Loading...
Need help?
General