StrongU Miner STU-U6 User Manual

4. Perform one of the following two operations:
1) Accept the default dynamic ip configuration (recommended), and
directly click Miner Configuration in the header to enter the Pool
Configuration page.
2) Set the static ip configuration. Click Setting in the lower right
corner or NetWork in the header to change network configuration.
Network configuration change
1. Click Static to enter the setting page.
2. Set the network parameters (consult the LAN administrator).
3. Click Save & Apply in the lower right corner and save the configuration.
4. Enter a new ip in the browser address bar for access to the miner.
5. Click “Miner Configuration” in the header and go to Pool Configuration.
Shenzhen StrongU Technology Co., Ltd.
9/13

StrongU Miner STU-U6 Specifications

General

Brand	StrongU
Model	Miner STU-U6
Category	Computer Hardware
Language	English