EN-11
C-Mount Coupler
The C-Mount coupler threads onto the face of the camera head, enabling a scope
to be attached to the camera. It provides a focusing ring to adjust image
sharpness.
The features of the coupler are listed in Figure 3 below. Additional instructions
are available in the “1188 C-Mount Coupler User Guide” (P/N 1000-400-905).
Figure 3: C-Mount coupler
1. Rear Adapter: Threads onto the camera head
2. Focusing Ring: Adjusts the coupler focus
3. Endobody Clamp: Secures the scope to the coupler
4. Scope End: Receives the endoscope
C-mount Couplers are available in autoclavable and non-autoclavable models:
Autoclavable
1188-410-110
(marked
AUTOCLAVE)
Non-autoclavable
1188-020-122
To Next Page