What does Stryker 1688010000 Digital Camera E-01 error code (“Video Error”) mean?
If your Stryker Digital Camera displays an E-01 error code (“Video Error”), try turning the console off, waiting 3 seconds, and then turning it back on. If the problem persists, contact Stryker.
What does Stryker 1688010000 Digital Camera E-04 error code (“Error Occurred”) mean?
If your Stryker Digital Camera displays the error code E-04 (“Error Occurred”), try turning off the console, waiting 3 seconds, and then turning it back on. If the problem continues, contact Stryker.
What does Stryker 1688010000 E-04 error code (“Warning Occurred”) mean?
If your Stryker Digital Camera displays the error code E-04 (“Warning Occurred”), try turning off the console, waiting 3 seconds, and then turning it back on. If the problem persists, contact Stryker.
General| Brand | Stryker |
|---|---|
| Model | 1688010000 |
| Category | Digital Camera |
| Language | English |
To avoid potential damage to this device, please note the following cautions.
To avoid potential serious injury to the user and the patient and/or damage to this device...
IMPORTANT SAFETY NOTICE - LASER RADIATION: SPY mode controls a Class 1M laser...
Refer to the following instructions and wiring diagram for a typical 1688 Video Camera configuration.
Unscrew the soaking cap from the cable connector on the camera head. Align the arrow on the cable connector...
Steps 1-3 below provide instructions for connecting 1688 Camera Heads to the 4K Coupler...
In SPY mode, the camera can visualize near-infrared light produced by the L11 LED Light Source...
Before using the camera in a surgical procedure, test all system components to ensure proper function.
Before each surgical procedure, perform the White Balance test to adjust the camera's perception of white...
The touchscreen interface on the console provides access to menus and controls for adjusting or capturing the video image.
The camera head features a four-button keypad for controlling the device. The default button functions are described below.
Solutions for common error codes (E-01 to E-05) and warning messages.
Troubleshooting for display problems like freezing, color issues, noise, and poor image clarity.
Resolving issues related to video signal, component recognition, and centering.
Addressing problems with SPY mode and Auto Light functionality.
These reprocessing instructions are provided in accordance with ISO 17664, ISO 15883, AAMI TIR12, and AAMI TIR30.
To Next Page
