Stryker Physio Control Lifepak CR2 - Specifying Network Settings; Completing Wi-Fi Setup

e. When the Wi-Fi setup is complete, you will
see the Update Successful screen.
f. Click Next, disconnect the USB cable, and
then click Close.
d. In the Specify Wi-Fi Network Settings screen,
select a network or click Add Custom Network
to enter your Wi-Fi network settings. Click Next
to apply the settings.
FAQs
Q: I closed the Wi-Fi Configuration Tool and need to open it again. Where can I find it?
A: Open the Start menu on your computer, and open the Physio-Control folder. Click
Wi-Fi Configuration Tool.