Need help?Do you have a question about the Stryker Power-PRO IT Cot and is the answer not in the manual?
General| Brand | Stryker |
|---|---|
| Model | Power-PRO IT Cot |
| Category | Medical Equipment |
| Language | English |
Essential safety guidance for operating the cot and general precautions to follow.
Details the Stryker Model 6516 Power-PRO™ IT cot, its features, and intended use in emergency transport.
Specifies the cot is for transporting patients in incubators and general patient transport in emergency settings.
Instructions for installing the cot fastener system onto the ambulance vehicle.
Steps for installing the integrated in-fastener shut-off system with antler style cot fasteners.
Adjusting the cot's load height using the jog function for optimal positioning.
How to check the SMRT Pak battery level using the cot's LED indicator.
Checking the hour meter for maintenance and error codes for troubleshooting.
Key safety and operational rules to follow when using the Power-PRO IT cot.
Ergonomic advice for lifting patients and equipment safely to prevent injury.
Safely rolling the cot with a patient, including handling obstacles.
Steps for raising or lowering the cot manually or using powered controls.
Using cot control switches to adjust height or release the cot from Power-LOAD.
Manually adjusting cot height using the red manual back-up release handle.
Using the retract button to speed up loading when cot wheels are not supporting weight.
Information on Power-LOAD system compatibility and use with specific Stryker cot models.
Step-by-step guide for loading the cot into a vehicle using an antler style cot fastener.
Instructions for mounting the bracket for the SMRT charger in ambulance or station locations.
Lists recommended cleaning agents and disinfectants for the cot and its components.
Notes that the cot operates without lubrication and advises against lubricating X-frame bearings.
Maintenance schedule for monthly, quarterly, and semi-annual inspections of cot components.
Declarations on electromagnetic emissions compliance for Power-PRO and SMRT charger.
Minimum distances for RF equipment to maintain electromagnetic compatibility with the cot.
Electromagnetic immunity compliance levels for the cot and charger based on IEC standards.
To Next Page