EasyManua.ls Logo

Stryker Power-PRO 2 User Manual

Stryker Power-PRO 2
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
PPoowweerr--PPRROO 22 CCoott
OOppeerraattiioonnss//MMaaiinntteennaannccee MMaannuuaall
650700000000
650700080301
650700450301
650705550001
650705550002
650705550003
EN
6507-009-001 Rev AB.3 2021-08

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Stryker Power-PRO 2 and is the answer not in the manual?

Stryker Power-PRO 2 Specifications

General IconGeneral
BrandStryker
ModelPower-PRO 2
CategoryMedical Equipment
LanguageEnglish

Summary

Warning Caution Note Definition

Summary of safety precautions

Read and strictly follow warnings and cautions. Service by qualified personnel.

Introduction

Product description

Details about the Stryker Power-PRO 2 ambulance cot, its features, and components.

Indications for use

Defines the intended use of the Power-PRO 2 cot for patient transport in emergency settings.

Clinical benefits

Outlines the advantages and benefits of using the cot for patient transport.

Contraindications

Lists known conditions or situations where the product should not be used.

Expected service life

Provides information on the estimated lifespan of the cot and its components.

Disposal recycle

Guidelines for the environmentally responsible disposal and recycling of the equipment.

Specifications - Power-PRO 2

Power system

Environmental condition

Details operating and storage conditions for temperature, humidity, and pressure.

European REACH - Power-PRO 2

Lists components containing declarable substances as per European REACH regulation.

China RoHS - Power-PRO 2

Standards with required options

WiFi radio specifications option

Details specifications for the optional WiFi radio communication module.

Specifications - Alvarium

European REACH - Alvarium

Lists Alvarium system components containing declarable substances per European REACH.

China RoHS - Alvarium

Product illustration - Power-PRO 2

Product illustration - Alvarium

Contact information

Provides contact details for Stryker Customer Service and Technical Support.

Serial number location - Power-PRO 2

Serial number location - Alvarium

Shows serial number locations on the Alvarium battery and charger.

Setup

Installation

Installing the cot fastener

Instructions for installing the cot fastener system, including safety warnings.

Installing the in-fastener shut-off

Steps to install the in-fastener shut-off system for antler style fasteners.

Selecting the vehicle safety hook

Vehicle configuration

Positioning of the vehicle safety hook, front to back

Positioning of the vehicle safety hook, side to side

Installing the vehicle safety hook

Operating guidelines

Operation

Checking the battery power level

Explains how to check the battery charge level using the LED indicator bars.

Transferring the patient to the cot

Steps and warnings for safely transferring a patient onto the cot.

Raising or lowering the cot

Raising or lowering the cot manually with the manual override

Procedure for manual cot height adjustment using the back-up release handle.

Applying or releasing a wheel lock or Steer-Lock

How to engage and disengage wheel locks and Steer-Lock for cot stability.

Rolling the cot with a patient

Pushing or pulling the cot with the transport handle

Instructions for using the transport handle for pushing or pulling the cot.

Loading the cot into a vehicle

Unloading the cot from a vehicle

Positioning operators and helpers

Raising or lowering the backrest

Raising or lowering the siderails

Instructions for raising/lowering siderails for patient safety and during transfers.

Raising or lowering the siderails (XPS option)

Details on adjusting siderails for the XPS option, including specific cautions.

Extending or retracting the retractable head section

Extending or retracting the retractable foot section

Procedure for extending and retracting the foot section for positioning.

Raising or lowering the footrest

Raising or lowering the knee Gatch

Steps to raise and lower the knee Gatch for patient positioning.

Securing the patient with the restraint straps

Attaching the shoulder restraints

Detailed steps for attaching X-restraint shoulder straps to the cot.

Attaching the waist restraints

Detailed steps for attaching X-restraint waist straps to the cot.

Attaching the thigh restraints

Detailed steps for attaching X-restraint thigh straps to the cot.

Attaching the ankle restraints

Detailed steps for attaching X-restraint ankle straps to the cot.

Adjusting restraint straps

Instructions on how to open, close, lengthen, and shorten restraint straps.

Adding a restraint strap extension

Securing the child restraint with the X-restraint package

Steps to secure a child restraint to the cot using the X-restraint package.

Hanging equipment from the equipment hook

Positioning the two-stage IV pole option

Positioning the three-stage IV pole option

Instructions for positioning and adjusting the three-stage IV pole.

Attaching an oxygen bottle to the oxygen bottle holder option

Attaching the base storage net option

Instructions for attaching the base storage net.

Attaching the backrest storage pouch option

Attaching the head end storage flat option

Instructions for attaching the head end storage flat.

Attaching the mattress

Details on attaching compatible mattresses to the cot.

Inserting the battery

Removing the battery from the product

Steps for removing the battery from the cot, including safety warnings.

Storing the battery

Charging the battery

Detailed steps and warnings for charging the battery.

Electrical power requirements

Charger setup

Guidelines for setting up the charger in an appropriate environment.

Securing the mounting plate option

Securing the charger to the mounting plate option

Steps to attach the charger to the secured mounting plate.

Powering the charger

Disconnecting the charger

Accessories and parts

Cleaning and disinfecting with wipes

Cleaning the product

Disinfecting the product

Cleaning the charger

Cleaning the battery

Instructions for cleaning the battery, including safety precautions.

Preventive maintenance

Lubrication

Information regarding lubrication of the cot's X-frame bearings.

Regular inspection and adjustments

Scheduled inspections and adjustments for optimal product performance and safety.

Every six months or 12 hours

Every 12 months or 24 hours

Inspection items and procedures for a 12-month or 24-hour interval.

Wireless notifications

EMC information

Guidance and manufacturer's declaration - electromagnetic emissions

Declaration regarding product's emissions and compliance environment.

Guidance and manufacturer's declaration - electromagnetic immunity

Declaration regarding product's immunity and suitability for healthcare environments.

Related product manuals