Stryker Power-PRO 2 - Power system; Environmental condition; European REACH - Power-PRO 2

Power system
Battery (650700080301) 25.6 VDC LiFePO4
Charger (650700450301) 100-240 VAC, 50/60 Hz, 1A
12-34 VDC, 5A
Cot duty cycle 16.7%
Standards ANSI/AAMI ES 60601-1, 60601-1-12, 60601-1-2, BS EN
1865-2, BS EN 1865-3, AS/NZS-4535, SAE J3027, BS EN-
1789, BS EN 597-1, 16 CFR 1632
For standards that require specific options, see
Standards
with required options
(page 11).
1
Height is measured from bottom of mattress at seat section to ground level.
2
Cot is weighed with one battery and without mattress and restraints.
Stryker reserves the right to change specifications without notice.
The yellow and black color scheme is a proprietary trademark of Stryker Corporation.
Labels may be unreadable from a viewing distance greater than 12 inches.
PPoowweerr--PPRROO 2 is designed to conform to:
• NFPA-1917
• CAAS-GVS
• KKK-A-1822
EEnnvviirroonnmmeennttaall ccoonnddiittiioonn
OOppeerraattiioonn SSttoorraaggee aanndd ttrraannssppoorrttaattiioonn
Temperature
130 °F
(54 °C)
-30 °F
(-34 °C)
130 °F
(54 °C)
-30 °F
(-34 °C)
Relative humidity
93%
10%
93%
10%
Atmospheric pressure
1060 hPa
620
1060 hPa
500
EEuurrooppeeaann RREEAACCHH -- PPoowweerr--PPRROO 22
In accordance with the European REACH regulation and other environmental regulatory requirements, the components that
contain declarable substances are listed.
DDeessccrriippttiioonn
NNuummbbeerr
SSuubbssttaannccee ooff vveerryy hhiigghh ccoonncceerrnn
((SSVVHHCC)) cchheemmiiccaall nnaammee
Base controller PCBA assembly 650700080800 Lead, lead monoxide (lead oxide),
diboron trioxide
Caster nut 6090-001-009 Lead
Cot comm board 650700080203 Octamethylcyclotetrasiloxane (D4)
Foot end interface board PCBA 650700080810 Lead, lead monoxide (lead oxide),
diboron trioxide
6507-009-001 Rev AB.3 9 EN