Stryker Power-PRO TL User Manual (English)

Questions and Answers:

A
Anita ReynoldsAug 16, 2025
What to do if Stryker Power-PRO TL litter does not lower in powered mode?
- K
  Keith PerezAug 16, 2025
  If your Stryker Medical Equipment litter isn't lowering in powered mode and the red light is blinking constantly, the first step is to change the battery. If the red light is blinking in a pattern (short, short, long), check for broken or disconnected wires. Also, check for 24V DC at connector (C) on the main cable by the motor while pressing the retract (-) button; if voltage is present, replace the solenoid and or ‘B’ valve. If voltage isn't present, check for 24V DC on electronics assembly pins 1 blue and 5 orange on (F) while pressing the retract (-) button. If voltage is not present, replace the electronics assembly. If voltage is present, replace the wire harness. If the GREEN light turns on, but does not lower, try the other switch. If the other switch works, replace the bad switch.
T
Troy JordanAug 19, 2025
What to do if Stryker Power-PRO TL base does not retract in the powered mode?
- T
  terryjosephAug 19, 2025
  If your Stryker Medical Equipment base isn't retracting in powered mode and the red light is blinking constantly, the first step is to change the battery. If the red light is blinking in a pattern (short, short, long), check for broken or disconnected wires. Also, check for 24V DC at connector (B) on the main cable by the motor while pressing the extend (+) button; if voltage is present, replace the solenoid and or ‘A’ valve. If voltage isn't present, check for 24V DC on electronics assembly pins 2 white and 6 red on (F) while pressing the extend (+) button. If voltage is not present, replace the electronics assembly. If voltage is present, replace the wire harness.
N
nmorganAug 25, 2025
How to fix Stryker Power-PRO TL base drifts?
- A
  Andrew OwensAug 26, 2025
  To resolve base drift in your Stryker Medical Equipment (without patient weight), you should first check the manual release cable adjustment. If the issue persists, try changing the ‘non-locking’ manual valve, or change the ‘A’ valve.
L
Lauren ChaseAug 28, 2025
How to fix Stryker Power-PRO TL litter drifts?
- M
  michaelespinozaAug 28, 2025
  To resolve litter drift in your Stryker Medical Equipment (without patient weight), you should first check the manual release cable adjustment. If the issue persists, try changing the ‘locking’ manual valve, or change the ‘B’ valve.
M
Michael DavidAug 31, 2025
What to do if high speed retract does not engage on Stryker Medical Equipment?
- P
  paula37Aug 31, 2025
  If the high speed retract isn't engaging on your Stryker Medical Equipment, first ensure that weight is off of the casters. If the issue persists, try changing the pressure switch.
P
parkianSep 3, 2025
What to do if Stryker Medical Equipment base does not extend in the manual mode?
- D
  David PhelpsSep 3, 2025
  If the base of your Stryker Medical Equipment isn't extending in manual mode, start by checking the manual cable adjustment. If that doesn't solve the problem, try changing the ‘non-locking’ manual valve.
C
Carolyn GillespieSep 6, 2025
What to do if Stryker Power-PRO TL Medical Equipment litter does not extend in the manual mode?
- L
  lisajacksonSep 6, 2025
  If your Stryker Medical Equipment litter does not extend in the manual mode, start by checking the manual cable adjustment. If that doesn't solve the problem, try changing the ‘non-locking’ manual valve.
X
xleeSep 9, 2025
What to do if Stryker Power-PRO TL base does not retract in the manual mode?
- J
  Joseph TranSep 9, 2025
  If the base of your Stryker Medical Equipment isn't retracting in manual mode, first check the manual release cable adjustment. If the issue continues, try changing the ‘locking’ manual valve.

Stryker Power-PRO TL Specifications

General

Brand	Stryker
Model	Power-PRO TL
Category	Medical Equipment
Language	English

Summary

Symbols and Definitions

Symbols

Explains various symbols used in the manual and on the equipment.

Warning/Caution/Note Definitions

Defines the meaning of WARNING, CAUTION, and NOTE statements.

Introduction

Product Description

Provides a general overview of the Power-PRO™ TL cot's features.

Intended Use of Product

Details the specific applications and intended use of the ambulance cot.

Specifications

Lists the technical specifications, dimensions, and capabilities of the cot.

Contact and Serial Number Information

Provides contact details and serial number location for support.

Product Illustration

Displays a diagram identifying the cot's components.

Summary of Safety Precautions

Critical Operational Warnings

Outlines critical safety warnings regarding operation, modification, and general use.

Pinch Point Hazards

Highlights hazardous pinch point locations on the cot to prevent injury.

Operational Cautions

Provides important cautions for safe operation, maintenance, and handling.

Setup Procedures

Product Inspection Checklist

Details the checklist for ensuring the cot is in proper working condition before use.

Cot Fastener Installation

Installation Specifications and Guidelines

Provides diagrams and dimensions for proper cot fastener installation.

Operation Guide

Cot Fastener Operations

Instructions for engaging and removing the cot from the vehicle fastener.

Safe Operation and Patient Handling

Covers guidelines, lifting, patient transfer, and rolling the cot safely.

Loading, Unloading, and Transport

Procedures for vehicle loading/unloading via tail lift or ramp.

Cot Adjustments and Features

Details on height adjustment, retract/extend, locks, and sections.

Power System and Battery Management

Covers battery handling, indicators, and hour meter for power system.

Restraints and Accessories Operation

Guidance on using restraint straps, extensions, push bars, and I.V. poles.

Optional Accessories

Equipment Hook

Describes how to use the equipment hook for attaching devices.

Pedi-Mate® Infant Restraint System

Instructions for attaching and using the infant restraint system.

Backrest Storage Pouch

Details on installing and using the backrest storage pouch.

Oxygen Bottle Holder

Instructions for attaching and using the oxygen bottle holder.

Cleaning Procedures

Washing Guidelines and Limitations

Details recommended cleaning methods and restrictions for the cot.

Iodine Compound Removal

Specific instructions for removing iodine stains from the cot.

Preventative Maintenance

Regular Inspection and Adjustments Schedule

Provides a schedule for routine checks and adjustments to maintain the cot.

Lubrication Requirements

Specifies if and where lubrication is needed for the cot's operation.

Maintenance and Training Records

Maintenance Record Form

A log for recording performed maintenance operations and hours.

Training Record Form

A log for tracking trainee names, dates, and training methods.

Troubleshooting Guide

Component Locators and Diagrams

Identifies locations of key electronic and hydraulic parts with diagrams.

Wiring and Assembly Details

Describes cable assemblies, wiring schematics, and electrical diagrams.

Problem Resolution

Lists common problems and their corresponding troubleshooting steps and solutions.

Quick Reference Replacement Parts List

Service Information

Hydraulic Sub-Assembly Access

Steps to access the hydraulic system for service and maintenance.

Cable and Reservoir Service

Procedures for manual release cable adjustment and filling the hydraulic reservoir.

Wheel Lock Adjustment

Steps to adjust the force of the wheel locks for proper function.

Cot Assembly and Component Breakdowns

Major Structural and Mechanical Assemblies

Breakdowns of lift tubes, hitch, rails, hydraulics, base, and wheels.

Functional Assemblies and Accessories

Details on I.V. poles, push bars, battery labels, and other optional accessories.

Recycling Passport Information

SMRT Pak Recycling

Material code and quantity for SMRT Pak recycling.

Battery Pack Recycling

Material code and quantity for battery pack recycling.

Printed Circuit Board Recycling

Material code and quantity for printed circuit board recycling.

Electrical Cable Recycling

Material code and quantity for electrical cable recycling.

EMC Information

Electromagnetic Immunity Guidance

Details immunity test levels and compliance with environmental guidance.

RF Separation Distances

Guidelines for separation from RF communications equipment.

Electromagnetic Emissions Data

Information on RF, harmonic, and voltage emissions compliance.

Warranty and Return Information

Product Warranty Terms

Details warranty terms for parts, labor, and specific components.

Return Policy and Claims Process

Information on product returns, damaged merchandise, and claims.

Patent Information

Lists patents covering the product and its systems.

Related product manuals

Stryker Power-PRO 2

76 pages

Stryker Power-LOAD 6390

66 pages

Stryker Power-PRO IT Cot

70 pages

Stryker Power-PRO XT 6500

Stryker T/Pump Series

54 pages

Stryker Prime TC 1450

98 pages

Stryker ProCuity Series

56 pages

Physio Control Lifepak CR2

16 pages

Flosteady Arthroscopy Pump 200

272 pages

Stryker Power-PRO TL User Manual

Table of Contents

Questions and Answers:

Stryker Power-PRO TL Specifications

Summary

Symbols and Definitions

Symbols

Warning/Caution/Note Definitions

Introduction

Product Description

Intended Use of Product

Specifications

Contact and Serial Number Information

Product Illustration

Summary of Safety Precautions

Critical Operational Warnings

Pinch Point Hazards

Operational Cautions

Setup Procedures

Product Inspection Checklist

Cot Fastener Installation

Installation Specifications and Guidelines

Operation Guide

Cot Fastener Operations

Safe Operation and Patient Handling

Loading, Unloading, and Transport

Cot Adjustments and Features

Power System and Battery Management

Restraints and Accessories Operation

Optional Accessories

Equipment Hook

Pedi-Mate® Infant Restraint System

Backrest Storage Pouch

Oxygen Bottle Holder

Cleaning Procedures

Washing Guidelines and Limitations

Iodine Compound Removal

Preventative Maintenance

Regular Inspection and Adjustments Schedule

Lubrication Requirements

Maintenance and Training Records

Maintenance Record Form

Training Record Form

Troubleshooting Guide

Component Locators and Diagrams

Wiring and Assembly Details

Problem Resolution

Quick Reference Replacement Parts List

Service Information

Hydraulic Sub-Assembly Access

Cable and Reservoir Service

Wheel Lock Adjustment

Cot Assembly and Component Breakdowns

Major Structural and Mechanical Assemblies

Functional Assemblies and Accessories

Recycling Passport Information

SMRT Pak Recycling

Battery Pack Recycling

Printed Circuit Board Recycling

Electrical Cable Recycling

EMC Information

Electromagnetic Immunity Guidance

RF Separation Distances

Electromagnetic Emissions Data

Warranty and Return Information

Product Warranty Terms

Return Policy and Claims Process

Patent Information

Related product manuals