FFiigguurree 2222 –– AAttttaacchhiinngg tthhee sshhoouulldd rreessttrraaiinnttss
FFiigguurree 2233 –– SShhoouullddeerr rreessttrraaiinnttss llooccaattiioonn
AAttttaacchhiinngg tthhee wwaaiisstt rreessttrraaiinnttss
To attach the X-restraint waist restraints:
1. Wrap the restraint around the cot frame where the matching label is located (Figure 24).
2. Pull the restraint buckle through the loop, toward the head end of the cot.
3. Feed the buckle under the XPS system.
4. Pull the buckles tight. One restraint should angle toward the head end and one should lay straight across the cot.
5. Connect the patient right buckle to the patient left buckle.
FFiigguurree 2244 –– WWaaiisstt rreessttrraaiinntt llooccaattiioonn
AAttttaacchhiinngg tthhee tthhiigghh rreessttrraaiinnttss
To attach the X-restraint thigh restraint:
1. Wrap the restraint around the cot frame where the matching label is located (Figure 25).
2. Pull the restraint buckle through the loop, toward the head end of the cot.
3. Pull the restraint tight.
4. Connect the patient right buckle to the patient left buckle.
EN 40 6507-009-001 Rev AB.3
To Next Page
Loading...
