Stryker Power-PRO 2 - Raising or lowering the backrest; Raising or lowering the siderails; Raising or lowering the siderails (XPS option)

CChhaannggiinngg lleevveellss RRoolllliinngg LLooaaddiinngg aanndd uunnllooaaddiinngg
Two operators (O)
Two helpers (H)
H
H
O
O
H
H
O
O
O
O
H H
Two operators (O)
Four helpers (H)
H H
H HO
O
O O
H
H H
H
H H
H
H OO
RRaaiissiinngg oorr lloowweerriinngg tthhee bbaacckkrreesstt
To raise the backrest, squeeze the backrest adjustment handle to move the backrest to the desired height.
To lower the backrest, squeeze the backrest adjustment handle while you push down on the backrest to the desired height.
RRaaiissiinngg oorr lloowweerriinngg tthhee ssiiddeerraaiillss
Always lower the siderails when you transfer a patient to the cot or from the cot.
CCAAUUTTIIOONN
• Do not use siderails as a patient restraint device.
• Do not use siderails as a push/pull device or to steer the product.
To raise the siderails, lift up on the siderail until the latch clicks and the siderail locks into place. Always keep the siderails in
the raised position unless you are transferring the patient.
To lower the siderails, squeeze the siderail release handle to release the siderail latch. Guide the siderail down toward the
foot end of the cot until the siderail lays flat. Always lower the siderails when you transfer a patient to or from the cot.
RRaaiissiinngg oorr lloowweerriinngg tthhee ssiiddeerraaiillss ((XXPPSS ooppttiioonn))
You can order your cot with the expandable patient surface (XPS) option or upgrade your cot to add the XPS option.
CCAAUUTTIIOONN
• Do not use siderails as a patient restraint device.
• Do not sit or stand on the siderails (XPS option).
• Do not use the siderails (XPS option) as a patient transfer device or surface (for example, to slide a patient from the cot
to another surface).
• Do not position patients with full weight on the siderails (XPS option).
6507-009-001 Rev AB.3 35 EN