IInnttrroodduuccttiioonn
This manual assists you with the operation or maintenance of your Stryker product. Read this manual before operating or
maintaining this product. Set methods and procedures to educate and train your staff on the safe operation or maintenance
of this product.
CCAAUUTTIIOONN
• Improper usage of the product can cause injury to the patient or operator. Operate the product only as described in this
manual.
• Do not modify the product or any components of the product. Modifying the product can cause unpredictable operation
resulting in injury to patient or operator. Modifying the product also voids its warranty.
NNoottee
• This manual is a permanent part of the product and should remain with the product even if the product is sold.
• Stryker continually seeks advancements in product design and quality. This manual contains the most current product
information available at the time of printing. There may be minor discrepancies between your product and this manual. If
you have any questions, contact Stryker Customer Service or Technical Support at 1-800-327-0770.
PPrroodduucctt ddeessccrriippttiioonn
The Stryker PPoowweerr--PPRROO 2 is a powered ambulance cot that consists of a platform, including a mattress, mounted on a
wheeled, retractable X-frame that is designed to support and transport a maximum weight of 700 lb (318 kg). The
AAllvvaarriiuumm™ rechargeable battery powers the hydraulic lift system and allows operators to raise and lower the cot using the
powered controls on the foot end lift bars.
The cot features low transport height capability. The cot has an adjustable load height feature to allow the cot to be set to
different ambulance deck heights during loading and unloading. The cot is equipped with a manual back-up release handle
to allow the operation of cot functions in the event of power loss.
Foot end LED lights illuminate transport areas and reflective markings aid in cot visibility. The cot is also equipped with the
following: a retractable head section for 360 degree mobility in any height position, siderails, adjustable backrest, patient
restraint straps, and standard mechanical steer and wheel locks. The cot can be equipped various optional accessories that
assist with the transport of the patient. The cot litter can be articulated in multiple positions. The cot service interface allows
service technicians to acquire cot data and update software.
PPoowweerr--PPRROO 2 is compatible with, and can be inductively charged by, the Stryker PPoowweerr--LLOOAADD® and PPeerrffoorrmmaannccee--
LLOOAADD® fastening systems. PPoowweerr--PPRROO 2 is also compatible with mass casualty, wall mount, and floor mount fasteners.
AAllvvaarriiuumm Battery Management System is comprised of a lithium iron phosphate battery pack and a universal charger. The
rechargeable battery acts as a power source for the PPoowweerr--PPRROO 2 cot.
IInnddiiccaattiioonnss ffoorr uussee
PPoowweerr--PPRROO 2 is intended to transport a patient to or from an emergency or non-emergency location, primarily within an
emergency transport vehicle, to a healthcare facility. PPoowweerr--PPRROO 2 is intended for adult, adolescent, and child occupants
who can be effectively secured by patient restraint straps on the product. Intended operators include trained professionals
(emergency medical services and medical care center personnel) and medical first responders.
PPoowweerr--PPRROO 2 is not intended for extended stay, use as a hospital bed, or devices that modify air pressure, such as
hyperbaric chambers.
CClliinniiccaall bbeenneeffiittss
Cot: patient transport
Fastener: support cot for transport
6507-009-001 Rev AB.3 7 EN
To Next Page
Loading...
