Stryker Power-PRO IT Cot User Manual

With both operators at the foot end With one operator at the foot end
and one operator on the side
With one operator (when unloading
an unoccupied cot)
a. Both operators: Grasp the cot
frame at the foot end.
b. Both operators: Pull the cot out
of the vehicle patient
compartment until the safety bar
connects with the vehicle safety
hook.
WWAARRNNIINNGG -- DDoo nnoott pprreessss tthhee
eexxtteenndd ((++)) bbuuttttoonn uunnttiill tthhee
ssaaffeettyy bbaarr ccoonnnneeccttss wwiitthh tthhee
vveehhiiccllee ssaaffeettyy hhooookk..
c. Operator 2: Make sure that the
safety bar connects with the
vehicle safety hook.
d. Operator 1: Depress the extend
(+) button to extend the cot
undercarriage.
e. Operator 2: Pull the safety bar
release lever forward to remove
the safety bar from the vehicle
safety hook.
NNoottee -- You can use the manual
back-up release handle or a
combination of the manual back-up
release handle, followed by the
extend (+) button. If you use the
extend (+) button, squeeze and hold
the manual back-up release handle
before you press and hold the
extend (+) button.
a. Operator 1: Grasp the cot frame
at the foot end and pull the cot
out of the vehicle patient
compartment until the safety bar
connects with the vehicle safety
hook.
WWAARRNNIINNGG -- DDoo nnoott pprreessss tthhee
eexxtteenndd ((++)) bbuuttttoonn uunnttiill tthhee
ssaaffeettyy bbaarr ccoonnnneeccttss wwiitthh tthhee
vveehhiiccllee ssaaffeettyy hhooookk..
b. Operator 2: Grasp the cot outer
rail to stabilize the cot.
c. Operator 1: Depress the extend
(+) button to extend the cot
undercarriage.
d. Operator 2: Pull the safety bar
release lever forward to remove
the safety bar from the vehicle
safety hook.
NNoottee -- You can use the manual
back-up release handle or a
combination of the manual back-up
release handle, followed by the
extend (+) button. If you use the
extend (+) button, squeeze and hold
the manual back-up release handle
before you press and hold the
extend (+) button.
a. Grasp the cot frame at the foot
end.
b. Pull the cot out of the vehicle
patient compartment until the
safety bar connects with the
vehicle safety hook.
WWAARRNNIINNGG -- DDoo nnoott pprreessss tthhee
eexxtteenndd ((++)) bbuuttttoonn uunnttiill tthhee
ssaaffeettyy bbaarr ccoonnnneeccttss wwiitthh tthhee
vveehhiiccllee ssaaffeettyy hhooookk..
c. Depress the extend (+) button to
extend the cot undercarriage.
d. Pull the safety bar release lever
forward to remove the safety bar
from the vehicle safety hook.
4. Remove the load wheels from the vehicle patient compartment floor.
PPoossiittiioonniinngg ooppeerraattoorrss aanndd hheellppeerrss
WWAARRNNIINNGG -- Always keep your hands clear of the red safety bar pivots when you load, unload, or change the height
position of the cot.
EN 30 6516-209-001 Rev D.0

Stryker Power-PRO IT Cot Specifications

General

Brand	Stryker
Model	Power-PRO IT Cot
Category	Medical Equipment
Language	English