Need help?Do you have a question about the Stryker SDP1000 and is the answer not in the manual?
Details critical safety guidelines for operating the device in medical settings.
Covers power cord specifications, medical use warnings, and MR environment caution.
Warns about connecting non-isolated equipment and potential electric shock risks.
Steps for removing the media tray and loading the ink ribbon correctly.
Steps for placing the paper roll into the media tray.
Describes correct paper roll placement, label removal, and inserting the media tray.
Describes the process of turning on the printer and capture device to start printing and monitoring progress.
Covers general safety during operation, handling the power cable, and avoiding internal access.
Provides steps for performing thermal head cleaning to maintain print quality.
Explains how to clean the printer rollers to remove scratches from printouts.
Detailed steps for performing roller cleaning using a cleaning sheet.
Addresses problems where the printer does not print despite receiving data.
Solves problems related to loading paper rolls and paper not feeding correctly.
Covers issues like offset printing areas and marks/stripes on the print side.
Describes how to recognize a paper jam based on indicator lights and messages.
Provides steps to remove jammed paper and check the paper roll status.
Instructions for dealing with unprinted paper during a jam, including cutting and re-rolling.
To Next Page
General