>> Download the complete manual at strymon.net/support/magneto <<
FEEDBACK ON/OFF: (GREEN LEDs) Enables or disables feedback of the corresponding
tape head signal to the record head.
TRANSPORT CONTROLS: (RED LEDs) allows for control of the corresponding
transport function.
TRANSPORT: Press to toggle functionality of the four buttons above it. Selected function indicated by LED color.
INFINITE: Disables the Record head and continuously plays the
most recent delay cycle or loop length audio.
FORWARD/REVERSE: Reverses the playback direction of the tape
from the moment the function is engaged.
RESTART: Restarts the playback of the loop or sample from the
starting point in LOOP or SAMPLE mode. Aligns shifted head
audio in ECHO operation. Restarts deck immediately from PAUSE,
without mechanical lag.
PAUSE: Stops/Starts the playback of the tape with mechanical
slowdown/startup effect. The speed of the slowdown/startup
effect can be adjusted by PLAYBACK LEVEL 4 knob when the
TRANSPORT and PAUSE buttons are RED (transport is paused).
PUSH BUTTON CONTROLS
MOMENTARY MODE:
INFINITE, REVERSE and PAUSE functions can be individually configured to respond to Gate signals instead of rising edge triggers. The TRANSPORT buttons will no
longer be latching. Example: Tape playback is reversed only while pressing and holding REVERSE button. See complete manual for in-depth detail.
To Previous Page
Loading...
