stud welding products STUDPRO Series - Specifications and Features

SPECIFICATIONS AND FEATURES
StudPro XI- Capacitor Discharge Stud Welder Series
The StudPro XI series of capacitor discharge stud welders incorporates the latest solid state
technology into a compact, lightweight, and rugged CD stud welder. This full line of equipment is
capable of welding pins, cup head pins, and CD studs ranging from 14-gauge up to 3/8” full-flanged
stainless steel studs.
Specifications
Features
• Intuive Touchscreen Interface with preset values for fast, accurate, and repeatable weld sengs
• Set-Point Discharge: Unit discharges directly to a new set point without needing to discharge com-
pletely
• Universal Input Voltage: Plug and play, no need to re-tap the machine for 110V or 220V input volt-
ages
• Low input voltage capability enables operaon with long extension cords
• Contact and Trigger indicators for fast troubleshoong of hand tool and weld cable maintenance
issues
• Thermal and Voltage protecon indicators to protect the unit from damage due to overheang or
poor input power
• Rigid internal construcon minimizes the possibility of components coming loose during rough han-
dling or operaon
• Hand tool has been ergonomically designed to reduce operator fague for increased welding e-
ciency
• Hand tool has an adjustable internal spring to apply the correct spring pressure for every welding
applicaon
• Hand tool can be congured for B collets, CI (Collet Inserts), Euro collets, or standard tapered
chucks
SPECS
StudPro 2500XI
StudPro 2500XIP
StudPro 3125XI
StudPro 3750XI
SIZE
14” L, 10.5” W, 11.5” H
356mm x 267mm x 292mm
WEIGHT
(Power Supply Only)
18 lbs. (8.1Kg) 18 lbs. (8.1Kg) 20.8 lbs. (9.4Kg) 23.4 lbs. (10.6Kg)
CAPACITANCE/ENERGY 76,000µF/1520Ws 76,000µF/1520Ws 114,000µF/2280Ws 152,000µF/3040Ws
WELD RANGE 14Ga - 1/4” Stainless
14Ga - 1/4” Stainless
(including cup head pins)
14Ga - 5/16” Stainless 14Ga - 3/8” Stainless
DUTY CYCLE
18 studs per minute
(1/4” sengs)
18 studs per minute
(1/4” sengs)
14 studs per minute
(5/16” sengs)
10 studs per minute
(3/8” sengs)
PRIMARY POWER
(Universal Input)
85-250 VAC, 6.0-2.0A, 50/60Hz
CHARGE VOLTAGE 35-200 VDC
3
* Specicaons are subject to change without prior nocaon