Studer Innotec SA
VarioString
User manual V 2.3 55
Combination of the events for the auxiliary contact
(AUX 1)
Activated in night mode (AUX 1)
Delay of activation after entering night mode (AUX 1)
Activation time for the auxiliary relay in night mode
(AUX 1)
VarioString is OFF (AUX 1)
Battery undervoltage (AUX 1)
Battery overvoltage (AUX 1)
PV error (48h without charge) (AUX 1)
Bulk charge phase (AUX 1)
Equalization phase (AUX 1)
Periodic absorption (AUX 1)
Battery voltage 1 activate (AUX 1)
Battery voltage 1 (AUX 1)
Battery voltage 2 activate (AUX 1)
Battery voltage 2 (AUX 1)
Battery voltage 3 activate (AUX 1)
Battery voltage 3 (AUX 1)
Battery voltage to deactivate (AUX 1)
Delay to deactivate (AUX 1)
Deactivate if battery in floating phase (AUX 1)
Contact activated with the temperature of battery
(AUX 1)
Contact activated over (AUX 1)
Contact deactivated below (AUX 1)
Only activated if the battery is not in bulk phase
(AUX 1)
Contact activated with the SOC 1 of battery (AUX 1)
Contact activated below SOC 1 (AUX 1)
Contact activated with the SOC 2 of battery (AUX 1)
Contact activated below SOC 2 (AUX 1)
Contact activated with the SOC 3 of battery (AUX 1)
Contact activated below SOC 3 (AUX 1)
Contact deactivated over SOC (AUX 1)
Delay to deactivate (AUX 1)
Deactivate if battery in floating phase (AUX 1)
Reset all settings (AUX 1)