Disposable Cartridge Ear Piercing System
©STUDEX
EAR PIERCING INSTRUCTIONS
12.
Removing the Cartridge
NOTE:
After piercing, place the plastic blister (the one
that cartridge came in) down on top of the
used cartridge as shown in Fig. 8.
Firmly holding the sides of the blister as shown
in Figure 9, slide the blister and cartridge
slightly forward to release the cartridge from
the channel.
Lift the entire cartridge assembly straight up
and out of the channel (Fig. 10).
Dispose of the used cartridge and blister in the
appropriate manner.
1.
2.
3.
4.
Do not touch the cartridge at any time.
Always use the blister as the holder when installing,
removing or transporting the cartridge. In this
way, sterility of the piercing studs and clasps
is maintained, and accidental contact with the
customer’s body fluids is avoided.
Always wear gloves for yours and customers
protection.
To Next Page
Loading...