Note: The complete descaling process will take approximately 30
minutes. Do not switch off the appliance or unplug during the
process.
1. Fill the water tank to “MAX” level.
2. Add one pack of cleaning agent into the water tank.
Important: Do not use vinegar or other cleaning agents to do
descaling for this appliance. It can damage the appliance.
3. Plug in the appliance.
4. Place a large container with at least 1.5L capacity under
the coffee spout.
5. Switch on the appliance.
6. Press and hold and Espresso
button simultaneously for 5 seconds. A beep sound will be
heard, and Espresso button will be flashing.
7. Press Espresso button to confirm to undergo descaling
process.
8. will be flashing which indicates that the appliance is
undergoing descaling process.
Note: Small amount of water will periodically depense
automatically during the descaling process.
Caution: Hot water can burn or scald. Do stay away.
9. When all water in the water tank is dispensed out, and
Espresso button will beflashing. Remove all the remaining
cleaning agent in the water tank, fill the tank with tap water to
the “MAX” level. When water is filled, will stop flashing.
The appliance will continue the descaling process.
To Next Page
Loading...