1. When the machine is in standby condition, press and
hold for 5 seconds.
2. The will flash and the following buttons will
have the following indications in different settings :
3. Press the hot water button for ECO mode, Espresso button
for Speed mode and Lungo button for Default setting. Two beep
sounds will be heard which indicates that the mode is selected.
(Note: If the relative lighted button for each mode is pressed, the
machine will not respond).
4. To remain the setting unchanged, press or wait for 5
seconds for the machine to return to standby condition.
CLEANING & MAINTENANCE
DESCALING
When is flashing, it indicates that the appliance needs to
undergo descaling. The appliance will remain in the best
condition if this function is performed at least once a month or
more regularly depending on the hardness of water used. Follow
the procedures below:
To Next Page
Loading...