10. When the descaling process completes, the appliance will
switch off automatically.
EMPTY SYSTEM FUNCTION
It is recommended to use the empty system function before
storing or before taking to repair agent.
1. Switch on the appliance.
2. Press and hold the button and Lungo button
simultaneously for 5 seconds.
3. will then be flashing.
4. Remove the water tank from the appliance. will light
up stably and indicate that the empty system is under process.
The coffee spout will dispense a small amount of water.
5. After completing the empty system function, the appliance
will switch off automatically.
Important: Press hot water button to clean the inner parts
of the coffee machine when it is used again.
MANUAL RINSING
Perform a manual rinsing cycle to clean the coffee spout after
use, or after the appliance is stored for a long period of time.
1. Switch on the appliance.
2. Press and hold the Power ON/OFF button and hot
water button simultaneously for 5 seconds.
To Next Page
Loading...