Introduction
This Quick Start Guide is intended to help you do just that – to get going with your digiLiVE as
quickly as possible. The Guide will show you how to connect your microphones, instruments or
other audio sources to the console, how to connect speakers in various ways and how to create
a basic mix. It goes on to show you how to enhance your mix by adding gating, compression and
reverb, and explains how your digiLiVE can be used as a monitor mixer. Finally, it shows you what
to do to control your digiLiVE remotely from a compatible iOS device.
IMPORTANT: This Quick Start Guide is not intended as an alternative or replacement for the full
digiLiVE User Guide, which will either be in the box with the console, or available to you as a free
download. As you work through the simple operating examples in the Quick Start Guide, you’ll
almost certainly notice that the console includes a great many features and possibilities that are not
covered here. Once you’ve mastered the basic principles of operation explained in the Quick Start
Guide, you should refer to the User Guide for full details of how to use all the additional facilities.
Unpacking your digiLiVE
Unpacking the digiLiVE
digiLiVE console
Console PSU
IEC power cable
Wi-Fi dongle
User Guide*
* may alternatively be available as a download from www.studiomaster.com
To Next Page
Loading...
