EasyManua.ls Logo

Studiomaster QX Series - Important Safety Instructions

Studiomaster QX Series
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1The equipment can only be inserted in the power outlet that is indicated by the manual.Otherwise
it may cause fire or electric shock.
2Do not place the container with liquid or small metal objects on the equipment. Otherwise, the
liquid or metal falling into the equipment may cause fire or electric shock.
3Do not place the weight (including the equipment) on the power cord. Otherwise, it may damage
the power cord, which can lead to fire or electric shock.
4Do not place the power cord in the vicinity of the heater. Otherwise it may lead to melting, causing
a fire.
5Do not scratch, bend, twist, stretch or heat power cord. Otherwise, it may damage the power cord,
which can lead to fire or electric shock.
6Pull off the power plug from the power outlet, please grasp the insulation part of the plug, do not
pull the cable. Otherwise, it may damage the power cord and the socket, which can lead to fire or
electric shock.
7Do not use wet hands to touch the power plug. Otherwise it may cause electric shock.
8Please do not let water enter the equipment or make it affected with damp. Otherwise it may cause
fire or electric shock.
9Please donont the use the equipment in the following occasions:
_An unstable platform surface, such as a shaking table or an inclined plane.
_A place where the air is exposed to high humidity or where dust accumulates.
_Exposed to an overheated environment, such as a window in a closed car or in direct sunlight.
_Exposed to splash oil foam, such as steam, stoves, boilers, humidifiers and other places.
10There are ventilation holes in front and behind the equipment, to avoid the impact of internal
cooling, do not block the ventilation holes.
11Please keep enough space around the equipment. Reserved space should not be less than: side
5cm, behind 10cm, and air follow unblocked.
12If you want to move the equipment, please unplug the power plug and unplug all the connecting
cables. Otherwise, it may damage the cable, which can lead to fire or electric shock.
13Attachment of the equipment (such as machine foot, manual bag, desiccant, etc.) please put them
in the place where children can not get them.
14Do not open the equipment cover. Otherwise may lead to electric shock. If you think the equipment
needs to be repaired or maintained, please contact the agent.
15Do not unauthorized change the equipment. Otherwise, it may result in abnormal, fire or electric
shock.
16If lightning strikes, please close the power switch as soon as possible, and unplug the power cord.
17The equipment output signal may be high voltage, there is a risk of electric shock, please use a
dedicated connection header.
18Connect the speakers to the amplifier output socket, can only use special speaker cable.Use of
other cables may cause fire.
19When connecting to the equipment, please turn off all the audio equipments and speakers.
20Before turning on the equipment, be sure to turn the volume knob to the minimum. Otherwise, a
sudden burst of sound may damage your hearing.
21If you will not use the equipment for a long time, please unplug the power cord from the AC power
outlet. Otherwise it could cause a fire.
22If the power cord is damaged (such as cut off or bare wire), get the replacement from the agent. Or
continue to use the equipment may cause fire or electric shock.
23If the equipment is shell damage or falling from high, please immediately turn off the power switch,
and unplug the power cord, and contact the agent. Otherwise it may cause fire or electric shock.
24When any abnormal, such as smoke, odor, etc., please immediately turn off the power switch,
unplug the power cord, and contact the agent. Otherwise, it may lead to fire or electric shock.
01
IMPORTANT SAFETY INSTRUCTIONS

Related product manuals