Stulz Compact CW Series - Periodic General Maintenance Checks and Service Checklist

(© Oct, 2007)
Compact CW Series Installation, Operation & Maintenance Manual
A
ir Technology Systems, Inc.
Frederick, Maryland USA 21704
Telephone: (301) 620-2033
Facsimile: (301) 620-1396
Periodic General Maintenance Checks and Services Checklist
Date: ____________________________ Prepared By: ___________________________
Model Number: ____________________________ Serial Number: __________________________
Item Number: ____________________________
Monthly
Filters Blower Section Condensate Drain
❏
Cleanliness
❏
Blower Turns
❏
Drain is Open
❏
No Obstructions
❏
Belts (if applicable)
❏
Condensate Pan Safety
Switches Operate Freely
Miscellaneous
❏
Check Chilled Water/Hot Water circuits for Air (bleed as required)
❏
Coils Clean and Clear of Obstructions
❏
Humidifier Cylinder and Controls Operate Properly
Semi-Annually
❏
Tighten Electrical Connections
❏
Clean Unit as Necessary
❏
Check Contacts on Contactors
❏
Clean Coils
for Pitting
❏
Clean Condensate Pump
❏
Heat/Reheat Operational
Annually
❏
Inspect Chilled Water System
for Leaks and Corrosion
❏
Conduct a Complete Check of All Services Listed
Above and Clean Unit's Interior
Notes:
___________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
___________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
___________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
___________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
Signature:________________________________
*** If factory assistance is required for any reason, provide the model number, serial number, and SATS item
number found on the unit nameplate. This will speed the process and ensure accuracy of information. ***
A-2
A
ir Technology Systems, Inc.