Sturdy SA-300MA - List of Error Codes (for Autoclave)

61
10.2 List of Error Codes (for autoclave)
ERROR
CODE
Description
E01 K-type sensor in chamber is out of connection (Emergency light illuminates)
E02 The door is not closed completely (Door light illuminates)
E03 Sterilization temperature over than 137°C (Emergency light illuminates)
E04 The water tank is in LOW WATER condition (LOW-WATER light illuminates)
E05 Water in the chamber is not enough in first 5 min. during add-water step.
E06
Sterilization temperature down under than 2°C over 5 min. in sterilization step
(EMERGENCY light illuminates)
E07 EMERGENCY water/pressure exhaust (EMERGENCY light illuminates)
E08 Jumper open- Error message displayed after vacuum pump operated for 10 min.