STYLEBOILER Smart Series

Questions and Answers

K
knightmichelleAug 4, 2025
What to do if STYLEBOILER Water Heater displays Err 3 (dry heat)?
- L
  Lauren BartonAug 4, 2025
  If the display shows 'Err 3', indicating dry heat, immediately shut down the power supply on the electric switchboard. Then, fill the STYLEBOILER Water Heater tank. Check the safety cut-out on the background and reset the safety trigger if necessary by pushing the button. Switch the power supply back on at the electric switchboard. If the water heater is full and the error persists, reset the dry heat error indication by replacing the background.
D
duncanthomasAug 10, 2025
How to unlock child lock on STYLEBOILER Smart Water Heater?
- L
  Lisa HamiltonAug 10, 2025
  If the STYLEBOILER Water Heater displays a locker symbol, it means the child lock is activated. To unlock it, press and hold (for more than 3 seconds) the indicated buttons simultaneously.
E
Edward HolmesAug 15, 2025
What to do if I have cold water while in Smart mode on my STYLEBOILER Smart?
- B
  brookepeckAug 16, 2025
  If you experience cold water while your STYLEBOILER Water Heater is in Smart mode, it may be due to an unexpected increase in water consumption. To address this, switch to Manual mode and select your desired temperature. You can return to Smart mode later. If the issue persists, increase the comfort level in Smart mode or use Manual Mode occasionally.
S
Shannon HortonAug 22, 2025
Why do I have cold water at the end of the day from my STYLEBOILER Smart Water Heater?
- D
  Dakota SextonAug 22, 2025
  If you're getting cold water from your STYLEBOILER Water Heater at the end of the day, but it's fine in the morning, it could be due to hot water consumption exceeding the heater's capacity. Try increasing the Smart mode level or increasing the temperature in Manual Mode. If the problem remains in Smart mode at the maximum level, switch to manual mode with a high temperature setting.
J
Janet YangAug 28, 2025
What to do if I have cold water while in Manual mode on my STYLEBOILER Water Heater?
- E
  Erica RobertsonAug 28, 2025
  If you have cold water while in Manual mode on your STYLEBOILER Water Heater, the temperature setting might be too low, or there could be a hardware issue. Increase the temperature level setting. If the issue persists, proceed as you would with unexpected long heating period symptoms.

Summary

Technical and Dimensional Characteristics

General Notices

Manual Introduction and Safety Symbols

Manual context, validity, and explanation of safety symbols.

Operating and Safety Guidelines

User operation instructions and safety regulations.

Warranty Information

Details on warranty coverage and conditions.

Installation Guide

Mounting, Anode, and Water Connections

Guidance on wall mounting, anode, water inlet/outlet, and safety units.

Filling, Emptying, and Electrical Connection

Procedures for filling, emptying, and electrical hook-up.

User Operating Instructions

Basic Operation: On, Display, Modes, Temp

Power-on, display, modes, and temperature adjustment.

Advanced Functions: Programs, Timers, Boost

Setting heating schedules, timers, and using boost.

Safety Features and Troubleshooting

Child lock, anti-legionella, error codes, and troubleshooting guidance.

Maintenance Instructions

Safety Device Reset and Anode

Resetting safety device and checking/replacing the anode.

Periodic Descaling and General Notes

Procedure for descaling the heating element and general maintenance tips.

Troubleshooting Common Issues