EasyManua.ls Logo

STYLEBOILER VF SMART 50 - User Manual

Default Icon
40 pages
Go to English
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Cod. 123308 - AGG. 24/10/2016
SMART 50 ÷ 100
SCALDACQUA ELETTRICO AD ACCUMULO SMART
Istruzioni per l’installazione, l’uso e la manutenzione
SMART ELECTRIC WATER HEATER
Instructions for installation, use and maintenance
IT
IT
I
T
EN

Table of Contents

Questions and Answers

  • M
    Michelle FreemanAug 9, 2025
    What to do if STYLEBOILER VF SMART 50 displays Err 3 (dry heat)?
    • D
      David ValenzuelaAug 9, 2025
      If the display shows 'Err 3', indicating dry heat, immediately shut down the power supply on the electric switchboard. Then, fill the STYLEBOILER Water Heater tank. Check the safety cut-out on the background and reset the safety trigger if necessary by pushing the button. Switch the power supply back on at the electric switchboard. If the water heater is full and the error persists, reset the dry heat error indication by replacing the background.
  • H
    harriskellyAug 15, 2025
    How to unlock child lock on STYLEBOILER Water Heater?
    • R
      rodney56Aug 15, 2025
      If the STYLEBOILER Water Heater displays a locker symbol, it means the child lock is activated. To unlock it, press and hold (for more than 3 seconds) the indicated buttons simultaneously.
  • M
    Maria HernandezAug 21, 2025
    What to do if I have cold water while in Smart mode on my STYLEBOILER VF SMART 50 Water Heater?
    • G
      gbrooksAug 21, 2025
      If you experience cold water while your STYLEBOILER Water Heater is in Smart mode, it may be due to an unexpected increase in water consumption. To address this, switch to Manual mode and select your desired temperature. You can return to Smart mode later. If the issue persists, increase the comfort level in Smart mode or use Manual Mode occasionally.
  • M
    Matthew JonesAug 27, 2025
    Why do I have cold water at the end of the day from my STYLEBOILER VF SMART 50?
    • D
      Dustin JohnsonAug 27, 2025
      If you're getting cold water from your STYLEBOILER Water Heater at the end of the day, but it's fine in the morning, it could be due to hot water consumption exceeding the heater's capacity. Try increasing the Smart mode level or increasing the temperature in Manual Mode. If the problem remains in Smart mode at the maximum level, switch to manual mode with a high temperature setting.
  • T
    Teresa GraySep 1, 2025
    What to do if I have cold water while in Manual mode on my STYLEBOILER VF SMART 50 Water Heater?
    • J
      Jody BeckerSep 1, 2025
      If you have cold water while in Manual mode on your STYLEBOILER Water Heater, the temperature setting might be too low, or there could be a hardware issue. Increase the temperature level setting. If the issue persists, proceed as you would with unexpected long heating period symptoms.

Summary

GENERAL NOTICES

Operating instructions

Outlines the intended use and limitations of the water heater.

Safety provisions and regulations

Details essential safety measures, regulations, and responsibilities for installation and use.

INSTALLATION (BY QUALIFIED PERSONELL ONLY)

Wall mounting

Water connection

Guides on connecting water inlet and outlet pipes, including essential components.

Water safety unit (COMPULSORY)

Details the mandatory water safety unit and its required components and settings.

Pressure reducer

Expansion tank

Filling the appliance

Step-by-step procedure for filling the water heater correctly before operation.

Electrical connection

Guidelines for connecting the appliance to the electrical mains safely and correctly.

OPERATING INSTRUCTION (USER)

Switching on

Temperature adjustment

How to adjust the water temperature for optimal comfort and energy saving.

Mode selection

Smart Mode

Details on the intelligent mode that learns consumption habits for energy saving.

Manual Mode

How to set and maintain a specific water temperature manually.

Boot

Timer setting

Program

Overview of programming heating periods based on 24-hour cycles.

Program period setting

Anti-Legionella cycle

Error code indicators

How error codes are displayed and what they signify.

Regulation trouble shootings

Troubleshooting common operational issues and error codes with possible causes and solutions.

Safety limiting device

Explanation of the safety device that prevents abnormal water heating.

Water safety unit efficiency check

MAINTENANCE INSTRUCTIONS (QUALIFIED PERSONNEL ONLY)

Safety limiting device (manual reset)

Steps for manually resetting the safety limiting device after an intervention.

Control;replacement of anode

How to check and replace the anode to protect the tank from corrosion.

Descaling (periodical)

TROUBLE SHOOTING

Electric heating element noisy

Dripping from water safety unit

Water leaks

STYLEBOILER VF SMART 50 Specifications

General IconGeneral
BrandSTYLEBOILER
ModelVF SMART 50
CategoryWater Heater
LanguageEnglish

Related product manuals