STYLEBOILER VF SMART 80 - User Manual

40 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

Cod. 123308 - AGG. 24/10/2016

SMART 50 ÷ 100

SCALDACQUA ELETTRICO AD ACCUMULO SMART

Istruzioni per l’installazione, l’uso e la manutenzione

SMART ELECTRIC WATER HEATER

Instructions for installation, use and maintenance

IT

IT

I

T

EN

Table of Contents

Questions and Answers

M
Michael BrownAug 9, 2025
What to do if STYLEBOILER Water Heater displays Err 3 (dry heat)?
- A
  Alexis BrooksAug 9, 2025
  If the display shows 'Err 3', indicating dry heat, immediately shut down the power supply on the electric switchboard. Then, fill the STYLEBOILER Water Heater tank. Check the safety cut-out on the background and reset the safety trigger if necessary by pushing the button. Switch the power supply back on at the electric switchboard. If the water heater is full and the error persists, reset the dry heat error indication by replacing the background.
T
Tiffany RothAug 15, 2025
How to unlock child lock on STYLEBOILER VF SMART 80?
- N
  nielsenjillianAug 15, 2025
  If the STYLEBOILER Water Heater displays a locker symbol, it means the child lock is activated. To unlock it, press and hold (for more than 3 seconds) the indicated buttons simultaneously.
D
Derek MendozaAug 21, 2025
What to do if I have cold water while in Smart mode on my STYLEBOILER Water Heater?
- D
  Dana HardyAug 21, 2025
  If you experience cold water while your STYLEBOILER Water Heater is in Smart mode, it may be due to an unexpected increase in water consumption. To address this, switch to Manual mode and select your desired temperature. You can return to Smart mode later. If the issue persists, increase the comfort level in Smart mode or use Manual Mode occasionally.
M
Michael RodriguezAug 27, 2025
Why do I have cold water at the end of the day from my STYLEBOILER VF SMART 80?
- N
  Nicole DanielsAug 27, 2025
  If you're getting cold water from your STYLEBOILER Water Heater at the end of the day, but it's fine in the morning, it could be due to hot water consumption exceeding the heater's capacity. Try increasing the Smart mode level or increasing the temperature in Manual Mode. If the problem remains in Smart mode at the maximum level, switch to manual mode with a high temperature setting.
T
Timothy ScottSep 2, 2025
What to do if I have cold water while in Manual mode on my STYLEBOILER VF SMART 80?
- L
  Logan AndersenSep 2, 2025
  If you have cold water while in Manual mode on your STYLEBOILER Water Heater, the temperature setting might be too low, or there could be a hardware issue. Increase the temperature level setting. If the issue persists, proceed as you would with unexpected long heating period symptoms.

Summary

General Notices

Operating Instructions

Safety Provisions and Regulations

Outlines responsibilities for installation, maintenance, and compliance with norms and directives.

Installation Guide

Water Connection

Mandatory Water Safety Unit

Mandatory installation of a safety unit with specific components and a rated pressure setting.

Filling the Appliance

Step-by-step guide to filling the appliance, including warnings about dry starting and water hardness.

Electrical Connection

Instructions for electrical connection, including voltage matching, switch requirements, and cable damage warnings.

User Operating Instructions

Switching On Procedure

Steps for turning on the water heater after installation and filling, including display behavior.

Temperature Adjustment

Details the electronic temperature regulation and the three function modes available.

Mode Selection

Instructions on how to navigate between different operating modes and set the clock.

Smart Mode Operation

Describes the Smart Mode, its levels of energy saving, comfort, and temperature settings.

Manual Mode Operation

Explains how Manual Mode maintains a stable temperature and how to select it.

Vacation Mode Details

Boost Function

Timer Setting Procedure

Instructions for setting the current time, which is mandatory before using program mode.

Programming Heating Periods

Allows users to define specific heating periods in a 24-hour day, potentially matching low tariff periods.

Program Initial Setting

Steps for starting the programming of heating periods (P1, P2, etc.).

Program Enable;Disable;Modify

How to enable, disable, or modify existing programs without clearing settings.

Program Period Setting

Details on selecting periods, start times, and end times for programmed heating.

Off-Peak Power Supply

Error Code Indicators

Lists error codes indicated by 'E' and explains their meaning and when they are displayed.

Troubleshooting Common Issues

Provides a table of symptoms, potential causes, and corrective actions for common issues.

Safety Limiting Device

Maintenance Instructions

Safety Limiting Device (Manual Reset)

Anode Control and Replacement

Periodic Descaling

Troubleshooting Guide

Water Leaks

STYLEBOILER VF SMART 80 Specifications

General

Brand	STYLEBOILER
Model	VF SMART 80
Category	Water Heater
Language	English

Related product manuals

STYLEBOILER VF SMART 50

Preview: STYLEBOILER Smart Series

STYLEBOILER Smart Series