5 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Assembly
1
Preparing media shelf and base assembly
NOTE: Do not fully tighten all bolts until you finish assembling all parts. Once assembled, go back and fully tighten all bolts. This will make
the assembly easier.
□ Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a carpeted floor or the empty
carton to avoid any scratches.
□ Securely screw the cam bolts (DD) into the designated small holes on the media shelf (L), bottom panel (M), front skirting (O), left
and right skirtings (P and Q) using a Phillips screwdriver. DO NOT overtighten the cam bolts.
2
Gluing wood dowels
□ Glue the wood dowels (BB) into the designated holes on the middle crossbar (A1) and skirting boards (N, O, P and Q) as shown.
NOTE:
Refer to the dowel assembling guide drawings in this step for further clarification on how to properly glue in the wooden dowels. Apply this
method whenever instructed to install wood dowels. It is very important to use a small amount of glue on both ends of dowels and wipe off the excess
glue immediately with a damp cloth.
To Next Page
Loading...