ARM-GZB208-E1-1
6
CE Mark
PSE Mark
Follow operating instructions
Chapter 2 Product Safety
2.1 Optical Safety
1) Avoid any light reflected by jewelry, watch, mirror etc;
2) Intense light can harm eyes and cause fire or burning. Don’t
directly watch the light from the tip. You shall wear glasses or
use opacity material for eyes protection;
3) Send much light energy to skin can cause skin hurt;
4) When you don’t use the equipment, please cut off the power supply and
put the handpiece on the stand;
5) Keep the tip clean and keep the tip glass from stick any other things;
6) Before change the tip, the equipment shall be at standby situation
2.2 Electric Safety
1) Be sure that rated input voltage written on the label is coincident with the
supply in the location（AC100v-240v、50Hz/60Hz）;
2) The maintain process can only be carried out after the power
has been shut off and the electric line has been unplugged.
Otherwise, there is danger to the personnel or the equipment;
2.3 Fire Protection
1) Don’t use this equipment near something easy to get burnt or get
explosion;
2) Take protective measures to prevent the intense pulse light from lighting
the treating room or flammable nearby;
3) If this equipment is not used for long time, you shall cut off the power
supply
To Next Page
Loading...