Suaoki 3000 - Install Battery to the Computer Unit; Set the Computer Unit

EN-12
Thank you for choosing Suaoki.
This product is a simple wireless bike computer that tracks cadence,
speed, distance and time. It is compact, lightweight and comes with
everything you need. This device is ideal for cyclists who like to know
all this data, monitor their progress or optimize their training.
Please read this manual thoroughly before use and keep it for future
reference.
Install Battery to the Computer Unit
[Refer to Diagram 6]
Step 1
Insert a coin to the dent of the battery cover and then rotate it
counter-clockwise to open battery cover.
Step 2
Note:
When using the computer unit for the first time, make sure to
remove the insulation pad inserted between the battery and the
computer unit.
Put in the button cell battery with the positive side facing upward. Put
the battery cover back and rotate it clockwise to close the battery
cover. Setting menu opens automatically when the battery is inserted.
Set the Computer Unit
[Refer to Diagram 1]
Pres SET button for selection. Press MODE button to confirm the
choice and move on to the next value. You can configure following
values: display language, units (KMH/MILE), bike A/B, wheel
circumference, total distance, total ride time, clock format 12H/24H,
clock time and gender, age, height, weight.
Note
* 1 DualBike Memory
This computer unit could record two sets of data, one set for Bicycle A,
another set for Bicycle B.