EN-16
Scan
Automatic rotation of selected values: Ride Time, Distance, Average
Speed, Max Speed and Total Distance
Memory
The memory saves data recorded in last 7 days. Press SET button to
switch among the days. Display data as follow: DIST, RIDETIME,
AVG-S, MAX-S, CALORIE and CO
2
(rotate automatically).
Clock
The clock is displayed in chosen format (12H or 24H)
Stopwatch
Press set button to start and then press set button again to stop. Hold
set button for 2 seconds to reset the numbers.
Count Range: 00:00:00~59M:59S:99~99H59M59S
Distance (DIST)
Measured in km or mile (according the settings)
Ride Time (RIDETIME)
Format HH:MM:SS
AVG Speed (AVG-S)
Measured in km/h or mph (according the settings)
Max Speed (MAX-S)
Measured in km/h or mph (according the settings)
How to enter into setting menu?
Switch to ‘Clock’ mode. Long press mode button/left button. Then the
computer unit would enter into the setting menu.
How to clear operation data?
You can reset the following values all together: RIDETIME, DST, AV-S
and MX-S, CO
2,
CALORIE. Long press SET button. On the display
screen, ‘RESET’ will flash for twice and then the value reset is done.
To Next Page
Loading...