A - USB Output Port B - Power Indicator Light
C - Master Button D -12V Indicator Light
E - 12V Forced Start Button F - Input Port
G - LED Flashlight H - 24V Forced Start Button
J - 24V Indicator Light
Notice
1. DO NOT use this product to start a car when the product is still hot
or when there is not enough battery left in the product. More than 75%
of remaining battery is needed to start a 24V vehicle and more than
50% is needed to start a 12V vehicle.
2. Disconnect the battery clamp from the vehicle immediately after
every starting attempt.
3. DO NOT use the jump starter to start the car in high frequency.
Allow at least 30s of resting time before jump starting a car again.
4. DO NOT charge the product immediately after use or while it is still
hot.Make sure the temperature is between 0°C and 40°F when charging.
5. Please charge the jump starter at least once a month to extend
battery life.
6. DO NOT allow the metal teeth of the red clamp to touch the metal
teeth of the black clamp.
7. Please keep this product away from children.
8. Please DO NOT disassemble this product.
9. Please store and charge the jump starter at a dry and well-ventilated
place. Keep it away from corrosive, flammable and explosive materials.
10. DO NOT expose this product to extreme environment where the
temperature and humidity is high.
11. Never burn or incinerate this product because it may explode and
generate toxic fumes and other potentially harmful chemicals.
12. Never insert foreign objects into any input or output ports,
because it may cause short circuit which will damage the battery and
even cause fire and personal injury.
EN-2
To Next Page
Loading...
Need help?
General
