Instruction
How to read the power indicator light?
1. Check the remaining power level
Press the master button to activate the lights.
There are 4 indicator lights in total to display the amount of battery
power left. See the chart below to understand how the No. of lights
and battery level corresponds:
No. of lights 1 light 2 lights 3 lights 4 lights
Battery level 25% 50% 75% 100%
2. Check the current charging status
The indicator light will flash one by one when the jump starter is being
charged. A solid light means a fully charged battery level. For
example, when 2 lights are illuminated and a third is blinking, that
means the unit is between 50%-75% charged. Once the third light
stops blinking the unit is 75% charged.
The 4 indicator lights will be off when the jump starter is fully charged.
How to read the voltage indicator light?
When the 12V or 24V indicator light is on, you could start the engine.
When the 12V and/or 24V light(s) flash(es), you need to decide the
voltage of your car battery manually and force start the engine. For
more details, please refer to the following chart.
EN-3
Voltage Output
Voltage Indicator Light
Meaning
Vb≤4.5V NO
NO
12V
12V indicator light
flashes
The voltage of 12V
battery is too low
You can start the
engine now
The 12V vehicle can
start by itself
12V indicator light
is on
12V indicator light
is on
4.5V≤Vb
≤V
V≤Vb≤
13.5V
To Next Page
Loading...
Need help?
General
