EasyManua.ls Logo

Suaoki G500 - Output Ports; Charging Your Electronic Devices

Suaoki G500
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
your portable power supply, plug the other end to car cigarette socket of your car. You can
know the charging state from the LCD display.
Note: Car cigarette socket of 12V vehicle can’t charge the portable power supply fully, but
the 24 vehicle can.
To charge the portable power supply with car charger, you need to start your car first.
How do you know if your portable power supply is charged?
To check the charging state of your portable power supply, refer to the LCD Battery Display.
When lit up, you will see a battery outline with five segments,indicating the current charge
level.You can turn on the Battery Display by pressing the Master Power Button.It is OK to
use your PS5B even when it’s not fully charged.
How do you know if your device will work with this product?
First, you need to determine the amount of power your device requires. This may require
some research by yourself, examining the user guide for your device should suffice.
Second, you will need to check the capacity for the individual output ports. For example,the
AC port is monitored by an inverter that allows for 300W of continuous power. This means if
your device is a pulling more than 300W for an extended period of time, the portable power
supply will shut off.
Output Ports
AC Output
The maximum output current is 10A. The power rate is under 300W. During usage, please
make sure that this product is in contact with earth or ground.
13V/10A Cigarette lighter socket
Maximum output current is 10A.
12V/6A Output
There are two output ports. The output current of a single port is 3A.
USB QC3.0 Output
There are two output ports. The maximum output power is 18W(5A3A, 9V2A, 12V1.5A).
Output Voltage is 3.6V-12V(Adjustable).
TYPE-C QC3.0 Output
The maximum output power is 18W(5A3A, 9V2A, 12V1.5A). Output Voltage is
3.6V-12V(Adjustable).
How to charge your electronic devices
Step 1: Turn on the portable power supply
Long press the master power button for 2 seconds to turn on the product. The corresponding
indicator light and the LCD display would be on.

Related product manuals