Suaoki PF3S Series User Manual

2.P2P (Point to Point) Vertical Distance Measurement
※ Note: Only vertical distance would be measured in this mode.
Short press to switch to P2P vertical distance measuring mode. In this mode,
would flash on screen. Aim at point A, press to measure Straight-line distance 1 and
angle β. Aim at point B, press to measure Straight-line distance 2 and angle α. The
vertical distance (H) would be calculated automatically and displayed. The difference
between angle β and angle α would also be calculated automatically and displayed.
M
EN-5
Yd
A
B
H2
H1
Straight-line distance 1
Straight-line distance 2

Suaoki PF3S Series Specifications

General

Brand	Suaoki
Model	PF3S Series
Category	Measuring Instruments
Language	English