10
■ Here are some common devices and their watt-hour requirements:
Smart phone(2~4W) 80+ Recharges
Tablet(25~42W) 7+ Recharges
Laptop(50W) 6+ Hrs
Desktop Computer(100W) 3+ Hrs
Mini Fridge(30~60W) 5~10 Hrs
30’’ LCD TV (98~156W) 2~4 Hrs
Vacuum Cleaner(200~300W) 1~2 Hrs
Blender/Processor(200~300W) 1~2Hrs
When you are going to power your device with the portable power supply,you can do some
research about the watt consumption of your device.
7. Troubleshooting
If your device can be charge with this portable power supply,follow these steps:
1. Make sure the Master Power Button is turned on.
2. Ensure the output port has been turned on.The green LED light indicating its state should be lit
up.
3. Check the battery capacity display.If it’s at 20% or below,you need to charge the portable power
supply.
4. Verify your device is suitable to be charged with this product.All the output ports have their own
max power capacity.Check them to ensure your device is compatible.
If you are still experiencing trouble with this product after checking the TROUBLESHOOTING as
below,please contact us.
Failure
Code
Failure Cause Troubleshooting
E01 System over-temperature protection
Check the ambient temperature if higher
than 45
℃
.Output will start again,if the
product cools down.
E02 Battery Over Voltage Protection Disconnect the charger and restart it
E03 Battery Damage Protection Contact US
E04 1st
Battery String Over-Voltage Disconnect the charger and restart it
To Next Page
Loading...
