Instructions
● Reading the power indicator
· 2 ·
ENGINE
START
15V/1A
①
②
③ ④ ⑤
⑥⑦
1. Check the remaining power level
Press the power button to activate the lights.
Suaoki T10 has 4 indicator lights in total to display the amount of battery power left. See
the chart below to understand how the No. of lights and battery level corresponds:
2. Check the current charging status
The indicator light will flash one by one when the jump starter is being charged. A solid
light means a fully charged battery level. For example, when 2 lights are illuminated and
a third is blinking, that means the unit is between 50%-75% charged. Once the third light
stops blinking the unit is 75% charged.
※ Note:
It takes around 4 hours to fully charge the jump starter. Over-charging is best to
be avoided as it may raise safety concerns and shorten battery life.
No. of lights
Battery level
1 light
25%
2 lights 4 lights3 lights
50% 75% 100%
EN
To Next Page
Loading...
