Product Parameter Package Content
· 4 ·
● Charging electronic devices
Choose a suitable charging cable and insert the cable into the USB port of the jump
starter. Then insert the other end of the cable into the input port of the cell phone/tablet,
click the power button then your device is being charged.
● Using the LED flashlight
Press the power button for 3 secs to turn on the flashlight.
There are 3 LED light modes that appear in the following order:
1st click: Strong lighting mode
2nd click: SOS mode
3rd click: Strobe mode
4th click: Off
Our company provides customers with warranty of 12 months from the date of purchase.
Battery Capacity: 12000mAh/44.4Wh
Starting Outlet Voltage: 12V
Two USB Output: 5V-2.4A/2.4A（Max)
Charging Mode: 15V/1A
Start Current: 200A
Peak Current: 400A
Operating Temperature Range: -20℃ to
60℃ / -4℉ to 140℉
Warranty
For any inquiries or comments concerning our products, please send an email to
support@suaoki.com, and we will respond to you as soon as possible.
Contact us
●
1 x Suaoki T10 Jump Starter
●
1 x Adapter
●
1 x Car Charger
●
1 x Pair of Battery Clamps
●
1 x Micro USB Cable
●
1 x User Manual
※ Note:
1. Step 1 comes before step 2. For safety concern, please do not reverse the order.
2. DO NOT use the jump starter to start the car in high frequency, the time interval
between two starting attempts must be longer than 30s.
3. The jump starter cannot be used as a charger for the car battery.
EN
To Next Page
Loading...
Need help?
General
